The Prism T20s tank from Innokin.

The T20s Prism S 20mm tank made for mouth to lung vapers is ideal for people who have just made the switch from smoking to vaping. The draw is similar to that experienced when smoking it is also a strong tank that can deal with everyday use. No glass to break and its inexpensive.

A choice of coil is available a 0.8 ohm slightly warmer intense vape with more vapour production and a 1.5 ohm slightly milder vape with medium vapour production. Try the 0.9ohm mesh coil that heats up quicker if you take short drags.

Prism S Tank compatible coils 

The T20s takes the Prism S T20s coils

0.8ohm or 1.5ohm and a 0.9ohm mesh coil

Dimensions: 19mm width, 55mm height 

Prism T20s Tank Contents

• Innokin T20s Tank
• 0.8ohm Prism-S coil x1 (pre-installed)
• 1.5ohm Prism-S coil x1
• Spare drip-tip
• Spare O-ring
• User manual

How to use your New Tank 

Notes on changing coils

The Innokin T20S Tank has a nice and easy coil change methord, making sure your tank is empty first.

1. Unscrew tank from device
2. Unscrew botton airflow ring
3. Pull the coil out from the base of the tank
4. Prime up the new coil (see notes on priming coils)
5. Check the wattage rating on the coil
6. Push the new coil in, making sure that the flat side of the coil line up with the tabs on the botton of the tank. 
7. Screw the airflow ring back onto the base of the tank (if you coil is not fully in there will be a gap between the airfolw ring and the tank)
8. Screw the tank back onto the device
9. Fill tank with e-liquid (see notes on filling your tank)
10. Set the device to the wattage on the coil
11. Enjoy

Notes on Filling the Tank

The Innokin T20s tank is easy to fill

1. Unscrew the black top part of the tank
2. Fill with eliquid down the side of the glass, try not to get eliquid in the center of the coil
3. Screw the top part back on