Endura T20S Vape Kit
Endura T20S Vape Kit
Free Tracked over £50 Learn more
Couldn't load pickup availability
Product Details
Product Details
The Innokin Endura T20 S kit is a starter kit from Innokin. Great for people looking to switch or those looking for a great mouth to lung kit. The kit comes with 2 x 0.8 ohm coils but also there is a 1.5 ohm coil for a slightly cooler less intense vape if you find the 0.8 a little too spitty/ angry or are looking to improve battery life at the exchange for a slightly less intense vape. Now available in the rare rainbow colour. This is good for those who want a little more than the t18 kit from innokin thanks to the bigger built in battery and the low resistance coil.
T20s Vape Kit Specifications
- Battery Capacity: 1500mAH
- Maximum Output Wattage 18W
- Maximum Output Current 6A
- Maximum Output Voltage: 3.85V
- Clearomizer Resistance: 0.6 Ohm (min.)
- Charging: Micro USB DC 5V/0.5A
- Dimensions: 132mm x 22mm
Endura T20s Kit Contents:
- 1x Endura T20S
- 1x Prism T20S Tank (0.8ohm)
- 1x Spare Prism S Coil (0.8ohm)
- 1x Spare Drip Tip
- 1x Quick Start Guide
- 1x Micro USB Charging Cable
- 1x User Packet
How to use your T20s Tank
Notes on changing coils
The Innokin T20S Tank has a nice and easy coil change method, making sure your tank is empty first.
- Unscrew tank from device
- Unscrew bottom airflow ring
- Pull the coil out from the base of the tank
- Prime up the new coil (see notes on priming coils)
- Check the wattage rating on the coil
- Push the new coil in, making sure that the flat side of the coil line up with the tabs on the bottom of the tank.
- Screw the airflow ring back onto the base of the tank (if your coil is not fully in there will be a gap between the airflow ring and the tank)
- Screw the tank back onto the device
- Fill tank with e-liquid (see notes on filling your tank)
- Set the device to the wattage on the coil
- Enjoy
Notes on Filling the T20s Tank
The Innokin T20s tank is easy to fill
- Unscrew the black top part of the tank
- Fill with e-liquid down the side of the glass, try not to get e-liquid in the centre of the coil
- Screw the top part back on
Notes on Priming T20s Prism Coils
- Always prime your coils well when using for the first time
- Add 5 or so drops to the centre of the coil saturating the cotton
- Reassemble the tank making sure the coil is secured in place
- Add your chosen liquid to the tank
- Take 5 or so long drags on your device without power
- To be absolutely sure leave rested upright for a minute
Specifications
Specifications
Manuals
Manuals
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Need Help?
Need Help?
For enquiries please contact us via:
Facebook: @VapersOnlineUK
Twitter: @VapersOnlineUK
Instagram: @VapersOnlineUK
Telephone: 01458 898224
Email: Support@VapersOnline.co.uk
We’re on the Gram
vapersonlineuk
vapersonlineuk
vapersonlineuk
vapersonlineuk
vapersonlineuk
vapersonlineuk

