The Doric 20se pod kit from Voopoo is a great little MTL (Mouth to lung) pod kit. Containing a very respectable 1200mAh internal battery with 12watts of power which is perfectly matched for the 1ohm mesh ITO coil pre installed. This great little kit should last the average vaper a full day of uninterrupted vaping, when it runs out of power simply charge it using the enclosed USB-C charging lead.

Specifications:

• Pod E-liquid capacity: 2 ml
• Material: PCTG
• Mod Material: Alloy
• Output power: 12w
• Draw Activated
• Battery capacity: 1200 mAh
• Dimensions: 118mm x 19mm

Kit contents:

• 1 x Doric 20se
• 1 x ITO Pod 
• 1 x ITO Coil, 1ohm (pre installed)
• 1 x Type-C Cable
• 1 x User Manual

How to use your Doric 20se Vape Kit

Notes on changing coils

The Voopoo Doric 20se Vape Kit is easy to change or prime the coil just make sure the tank/pod is empty

1. Pull Pod off the battery (it is held with magnets)
2. Pull out the old coil from the top section
3. Prime the new coil (see notes on priming coils) and check the wattage range (as you wont be able to see this later)
4. Push new coil back into the top section
5. Pull out the small bung
6. Fill your tank (see notes on filling your tank)
7. Set the devise to the wattage range on coil
8. Enjoy

Notes on filling your Pod

The Doric 20se Kit has a simple fill method

1. Take the pod off the battery section
2. Pull out the small bung
3. Slowly fill with liquid
4. Put bung back in
5. Put the pod back on the battery

Notes on Priming Coils

• Always prime your coils well when using for the first time
• Add 5 or so drops to the centre of the coil saturating the cotton
• Reassemble the tank making sure the coil is secured in place
• Add your chosen liquid to the tank
• Take 5 or so long drags on your device without power
• To be absolutely sure leave rested upright for a minute or so

If your battery has a built-in battery

If the battery is built into the device i.e. not removable always charge the battery with the lead provided and unless stated always using a 5v and 1amp USB Plug. Some plugs are designed for quick charging tablets and phones etc and this is too much too quickly for most vape devices. Please avoid usb sockets that are built into wall sockets as they can be much higher in current