The Voopoo Argus Pro 2 really is a do anything kit. Utilising the upgraded Gene.tt  2.0 chipset vape time has been increased by altering the way the power is delivered. 

Power Modes:

RBA: Manually adjustable from 5w to 80w peak power

Smart: The device reads the coil and automatically sets the power for optimum vape

Turbo: Boosts the power and vapour by 25% for max flavour.

You can lock or unlock the device using the physical dynamic switch.

The Argus Pro 2 Kit uses the  PnP X coils which range from:

0.6 Ohm with 18w to 23w range is for MTL (mouth to lung) and RDTL (restricted direct to lung) 

0.3 Ohm with 32w to 40w range for RDTL

0.2 Ohm for 40w to 60w DTL (direct to lung) vaping

0.15 Ohm for 60w to the full 80W power DTL.

All new PnP X coils are 4 layer for reduced leakage and extended use.  (Voopoo claim these coils are good for at least 100ml of e-liquid!)

Voopoo Argus Pro 2 Kit Specifications:

• Pod E-liquid capacity: 2 ml
• Material: PCTG
• Mod Material: Zink Alloy + leather
• Output power: 80W Max
• Output voltage: 3.2 - 4.2 V
• Resistance range: 0.1 - 3 Ω
• Top Airflow
• Display: 0.96" TFT
• Battery capacity: 3000 mAh
• Dimensions: 127mm x 30mm x 35mm

Argus Pro 2 Kit contents:

• 1 x ARGUS Pro 2 Battery Device
• 1 x Extra PnP X DTL Cartridge Pod 
• 1 x PnP X 0.15ohm coil (pre-installed)
• 1 x PnP X 0.3ohm spare coil
• 1 x Type-C Cable
• 1 x User Manual

How to use your Argus Pro 2 Vape Kit

Notes on changing coils

The Voopoo Argus Pro 2 Vape Kit is easy to change or prime the coil just make sure the pod is empty

1. Pull Pod off the battery (it is held with magnets)
2. Pull out the old coil from the top section
3. Prime the new coil (see notes on priming coils) and check the wattage range (as you wont be able to see this later)
4. Push new coil back into the top section
5. Pull out the small bung
6. Fill your tank (see notes on filling your tank)
7. Set the devise to the wattage range on coil
8. Enjoy

Notes on filling your Pod

The Argus Pro 2 Kit has a simple fill method

1. Twist the top cap to reveal the fill port
2. Slowly fill with liquid
3. Twist the top cap back
4. Vape away

Notes on Priming Coils

• Always prime your coils well when using for the first time
• Add 5 or so drops to the centre of the coil saturating the cotton
• Reassemble the tank making sure the coil is secured in place
• Add your chosen liquid to the tank
• Take 5 or so long drags on your device without power
• To be absolutely sure leave rested upright for a minute or so