The Nautilus 3 tank is the latest in the Nautilus Line and features a slide to fill mechanism making it much easier to fill than its predecessors and an easy change coil system that blocks the juice ports when you change the coil keeping the juice in the tank and stopping any potential mess. The Nautilus 3 is also compatible with all of the Nautilus BVC Coils, Nautilus 2s Coils and Triton Mini coils.

Aspire Nautilus 3 Tank Specifications

• Size: 24×48.5mm
• Capacity: 2ml 
• Coil: Compatible with all Nautilus series coils
• Adjustable airflow
• No leak coil change
• Slide top fill cap

Contents:

• 1* Nautilus 3 Tank (2.0 ml)
• 1* Nautilus BVC Coil 1.8Ω
• 1* Nautilus 2S Mesh Coil 0.7Ω (Pre-installed)
• 1* Spare Glass Tube (2.0 ml)
• 1* Spare Drip Tip
• 1* O-rings Pack
• 1* User Manual

How to use your Nautilus 3 Tank

Notes on Changing Coil

The Aspire Nautilus 3 tank has easy to change coils

1. Unscrew tank from device
2. Unscrew the bottom airflow ring
3. Remove the coil from the tank
4. Prime the new coil (see notes on priming coils)
5. Check the wattage rating on the coil
6. Install the new coil into the tank
7. Screw the airflow ring back on to the tank
8. Screw tank back on device
9. Fill the tank with eliquid (see notes filling your tank)
10. Set the device to the wattage on the coil
11. Enjoy

Notes on Filling the Tank

The Aspire Nautilus 3 tank has an easy way to fill

1. Find the arrow on the top of the tank
2. Push on the arrows
3. Fill in the hole
4. Push top back together

Notes on Priming Coils

• Always prime your coils well when using for the first time
• Add 5 or so drops to the centre of the coil saturating the cotton
• Reassemble the tank making sure the coil is secured in place
• Add your chosen liquid to the tank
• Take 5 or so long drags on your device without power
• To be absolutely sure leave rested upright for a minute or so