The K3 Glassomizer is the tank used in the Aspire K3 Starter Kit. It features a 2.0ml liquid capacity & takes the Nautilus BVC coils .

Features:

• 1. 2.0ml Glass tank
• 2. 1.8ohm Nautilus BVC coil pre-installed
• 3. Compatible with Nautilus BVC coils and triton mini coils
• 4. 510 threading
• Dimensions: 18mm width, 55mm height

How to use your New Tank 

Notes on changing coils

The Aspire K3 tank is a simple coil change as long as the tank is half full

1. Unscrew tank from device
2. Turn tank upside down
3. Unscrew the bottom part of the tank
4. Keep tank upside down a put to one side
5. Unscrew old coil from base of the tank
6. Prime the new coil (see notes on priming coils)
7. Check the wattage range on the coil
8. Screw the new coil into the base of the tank
9. Fill the tank with e-liquid
10. Screw the tank back together keeping it upside down
11. Screw tank on to device
12. Set device to the wattage on the coil
13. Enjoy

Notes on Filling the Tank

The Aspire K3 tank is a simple fill

1. Unscrew tank from device
2. Turn tank upside down
3. Unscrew the base of the tank
4. Put base to one side
5. keep tank upside down and fill down the side of the glass, until it hits the top of the metal part. Try not to get juice down the centre hole as this will just run on the mouthpiece
6. Screw tank back together, keeping it upside down
7. Screw tank back on the device